Although we do offer a permanent fixing option for this post, we call this our temporary post because it was introduced for use in soft ground situations on a non permanent basis.  The standard 2" x 2" post stands 22 inches high and has proved popular with exhibitors for outdoor stand demarcation, for marking gymkhana rings, parking areas and housing plots on new build ventures.
Also shown is our dual chain post standing 36 inches high and using the same wooden stake fixing.  This is ideal for providing a 'keep off' area marker.

FIXING OPTIONS

Option '1' .... the post is supplied with a 24" wooden stake as shown top right.  The stake is driven into the ground 9 - 12 inches and the post located over the top.  A securing screw and cover are also supplied to restrict the lifting off of the post by young children etc. The post itself is sturdy UPVC and both the post and stake can be re-used.  The stakes are not treated against damp rot so the product is not designed for permanent location in the ground without a treatment being applied. 

Option '2'  is 'Dig In' or direct installation into the ground.  The posts provided are 32 inches long which allows 10 inches for insertion into the ground.  At the bottom of each post there is a pin which protrudes 2 inches from each side, if you opt to place the posts in concrete this pin will prevent the posts from being removed.

In this range there are End Posts, Intermediate Posts, Corner Posts and 'T' Posts.
Before ordering you should sketch out your project and establish how many of each you may require.  Post spacing is subjective but 1.5 to 2.0 meters is a guide.